BOSS Batts are designed to provide simple and effective compartmentalisation and fire stopping in walls and floors.
BOSS Batts consist of high-density mineral fibre batt with an ablative fire resistant coating which can be used in conjunction with other high performance BOSS fire protection products to provide excellent integrity, thermal and acoustic insulation. The BOSS Batts prevent the passage of fire between compartment walls and floors whilst still allowing the insulation of services. BOSS Batts offer undoubtedly a cost-effective and simplest solution to cavity barriers, sealing wall and floor penetrations for up to FRL -/240/180.
BOSS Cable Transits CT120 & CT240 are designed to prevent the spread of fire from one compartment to another where electrical power, data and comms cables penetrate through separating walls and floors.
FacadeGard™ is a high-performance Open State Cavity Barrier (OSCB) designed to protect ventilated rainscreen façade systems by preventing the spread...
BOSS FastWrap-XLS™ is an advanced, ultra-lightweight fire-rated duct wrap engineered to deliver high-performance fire protection without slowing down installation. Designed for steel ductwork across HVAC applications, the system provides up to 120 minutes fire resistance while maintaining exceptional thermal insulation performance. Its low bio-persistent fibre core and fully encapsulated black foil outer layer ensure safe handling, durability, and a clean aesthetic finish for exposed services.
Flexible fire and acoustic rated acrylic intumescent sealant. Suitable for sealing joints, linear gaps and service penetrations. Our 5 hour fire rated sealant offers the best fire rating of all acrylic and PU sealants on the market, offering maximum protection from fire and smoke in both integrity and insulation. With an FRL of up to -/300/300, FireMastic-300™ is unrivalled.
FireMastic-HPE™ is a new High Pressure Exerting fire sealant to surpass all other sealants. Our flagship sealant is tested and approved to change the way firestopping is applied to pipes and penetrations.
BOSS FireMortar-360™ is a fire-resistant Gypsum based mortar material used to reinstate the fire resistance of openings in fire rated wall and floor substrates. FireMortar-360™ also offers high performance fire stopping around services in order to prevent the passage of fire and smoke whilst offering load-bearing capabilities.
FireSilicone-EMA™ is a fire resistant silicone sealant. It is a one-part, neutral curing silicone for construction joints and service penetrations. FireSilicone-EMA™ cures at room temperature under the action of atmospheric moisture to give a permanently silicone rubber.
FireStrip-ALX is elastomeric foam laminated with a graphite based intumescent compound on both sides. It is designed to perform as a 2 or 4-hour barrier in construction movement joints. Designed for long linear installations in horizontal and vertical applications.
FlexiCoat-MAK™ has been developed for use with BOSS FlexiBatt™, a flexible rockwool based product. Once the FlexiCoat-MAK is applied it prevents the passage of fire, smoke & sound between fire rated compartments giving a fire resistance of up to FRL -/240/180.
BOSS FlushBox FirePad™ is a simple, cost effective way to fire rate metal electrical flush boxes, power points and GPOs in 1 and 2 hour fire rated walls. Made from a high performance intumescent that expands roughly 25 times when exposed to fire, the BOSS FlushBox FirePad™ is already cut to size and peels and sticks to the back of the flush box, reinstating a fire rating up to -/120/120.
The BOSS FX Fire Collar™ is a cost-effective retrofit fire collar for sealing medium HVAC and electrical service bundles where they pass through fire-rated walls and floors.
The BOSS FyreBox™ is revolutionising firestopping methods for large bundles of mixed services. Designed to allow large bundles of pipes and cables to all pass through one single fire rated enclosure, the BOSS FyreBox™ is the only tested and proven method of firestopping multiple services with such simplicity of installation and ease of compliance.
The BOSS FyreBox™ is revolutionising firestopping methods for large bundles of mixed services. Designed to allow large bundles of pipes and cables to all pass through one single fire rated enclosure, the BOSS FyreBox™ is the only tested and proven method of firestopping multiple services with such simplicity of installation and ease of compliance.
BOSS PuttyPad™ is a pre-cut, fold-and-press method of reinstating fire resistance and acoustic isolation in single and double gang electrical flush boxes through fire rated walls. Made from a mouldable fire resistant putty with strong bonding capability that needs no primer, the BOSS PuttyPad™ presses into every internal face of the box and reinstates fire resistance up to -/180/- and acoustic isolation up to Rw70.
BOSS MaxiCollars™ set new standards in the use of retrofit pipe collars. With a unique design and advanced intumescent technology, MaxiCollars™ provide one of the highest expansion rates available on pipe collars, providing a high performance fire protection. Coupled with a unique profile of only 30mm or 40mm depth, MaxiCollars™ are the best choice for tight fitting areas or closely installed pipes.
BOSS P40 MAK-Wrap is a light-weight, versatile insulation wrap for protecting metallic service penetrations through fire walls. At 40mm thick and with a 40kg/m3 density, the P40-MAK Wrap offers a cost effective, easy to install method of providing the insulation requirements to penetrating pipes, cables & cable trays through fire walls, floors and ceilings. It consists of medium density mineral fibre insulation, lined on one face with reinforced aluminium foil backing. When used in conjunction with other high performance BOSS penetration seals, P40-MAK Wrap will increase the insulation rating of the installed system by up to 120 minutes, by blocking the transfer of heat from thermally conductive services in a fire situation.
BOSS PenoPatch™ is a low cost, simple method of sealing blank openings, individual cables, small bundles of cables, pipes and conduits in a range of 1hr fire walls. Made with a fire resistant advanced formula putty with a strong bonding capability, the BOSS PenoPatch™ simply presses onto the wall around the service and instantly provides up to a 60 minute fire rating.
The Thermal Defence Wrap is designed to maintain necessary insulation on metal or heat conductive services and prevent temperature rise of services that pass through a fire rated compartment during a fire.
UniWrap® is designed and tested to seal service penetration apertures containing plastic and metallic pipes with insulation, using thermoplastic composites based on graphite intumescent technology. Developed to provide a high volume expansion and pressure seal during a fire, UniWrap® is approved in a wide variety of substrates.
